KEY ELEMENTS: BOW AND FIELD OF CUT:
ENGINE CONTROL PANEL:
AND BASE MACHINE VICE CLAMPING PIECE:
PARTS ADJUSTABLE SAFETY SYSTEMS:
OPERATION:
Machine operation manual handling (downhill and uphill) of the bow and the movement of the vise clamping piece (opening and closing) must be performed manually by the operator.
Putting the machine live at the main switch located on the control panel and then select the most appropriate cutting speed for the material and the section to be cut.
Then:
TECHNICAL SPECS:
VERSIONS:
On request, you can get voltages and / or frequencies are different from those mentioned above.
OPTIONS:.
Used for mounting a BT200 chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**
